New Quick Deploy Masts
The FT30-M mast: made of strong, 2" diameter 6061-t6 aluminum, this 30' mast goes up in minutes and requires no tools for assembly. Composed of five (5), 6' sections, the sections slide together and are secured with steel pins. The tilt base enables installation in just about any environment. Two rotating guy rings allow for guy anchors to be determined after the mast is erected. Top section is reinforced for antenna attachment, or rotator installation. User supplies appropriate guy lines and base stakes for the base plate.
Options include base insulator so that the 30' mast can be used as a vertical antenna. An optional tapered top "stinger" extends mast for more efficient operation on low frequencies when used as an antenna.
 |
 |
 |
FT30-M Tilt base, five sections (6' each), secure pins for section couplers, reinforced top section, two (2) rotating guy rings. |
The FT28-M gin-pole mast: designed for one-person deployment, made of strong, 2"diameter 6061-t6 aluminum. This 28' mast goes up easily. The only tool required is a mallet and it is provided. Composed of 4' sections for easy transport, complete with guy lines, guy stakes and mallet. The base is secured first, the gin pole is then added and guyed. The 28' mast can now be hoisted vertically with the intended pay load. Optional powder coating in desert sand, or jungle green.
 |
 |
 |
 |
||
The FT20-TM tripod: tilting mast tripod - made of strong, 2" diameter 6061-t6 aluminum, this one-person-assembly 20' tripod goes up quickly. Height can be increased, depending on the payload and environment. Simple hand tools for assembly (i.e. a wrench) is all that is needed. One crescent wrench does it all. The mast hinges at the base for easy UP of your payload and is secured with large U-bolts to the top of the tripod. The plates at the end of each leg are wide enough for ballast, such as concrete blocks for increased stability. Adjustment of return tubes in base allows for leveling on uneven surfaces.
 |
 |
The FT15-T: made of strong, 1.5" diameter 6061-t6 aluminum, this 15' tripod goes up quickly with one person. There are no tools needed. Composed of six (6) identical 4' sections, three (3) sections slip into the welded hub for the support legs. The remaining three (3) sections slide together for the vertical support. This is perfect for VHF / UHF antennas.
The FT20-T: this 20' tripod is similar to the FT-15T, except composed of 5 1/2' sections for increased height.
 |
 |
FT15-T Welded tripod hub, six (6) identical sections (4' each). Select any 3 for the tripod legs and use the remaining 3 for the vertical support. |
Other masts are avilable for customer requests. Masts can also be powder coated.
Give us a call at 1 800 Number Is Coming Soon or send an e-mail to force12@sbcglobal.net for more information.
Force 12 knows performance.
Please contact Force 12 for additional information.