Force 12, Inc.
Low Profile Towers
These low profile towers are the answer for:
A minimal visual presence and OPTIONAL Powder Coated Paint
Mobile and portable operations (i.e. emergency, RV)
The towers are made of high quality, aluminum square tubing and delrin slides for smooth operation. The pulleys are commercial grade and the cables are aircraft quality. All pulley frames are welded to the sections. There is an internal safety, so the tower cannot be raised past the upper limit. The rotator mounts on the top plate, which is pre-drilled for both popular bolt patterns. LPT's are available in a variety of sizes to fit most every need. Custom heights and powder coating are optional..
Towers must be bracketed to house or vehicle, or guyed using cable / rope or optional rigid guys. Various bases are available. Worm-drive winch is standard and can be run with a cordless drill using the provided loop and hook.
Low Profile tower with 6’ sections
(UPS shippable)
4 sections
6’9" nested height
20’ extended height
22 sqft windload at 60 mph*
MODEL LPT620
Low Profile tower with 8’ sections
4 sections
8’9" nested height
27’6" extended height
15 sqft windload at 60 mph*
MODEL LPT827
Low Profile tower with 12’ sections
4 sections
12’9" nested height
42’ extended height
9 sqft windload at 60 mph*
MODEL LPT1242
*60 mph windload at 10’ above ground. Wind velocity is higher at the extended height and is taken into account.
Field Day with an LPT-1242.
Tower is set up temporarily using an optional X-base and guyed at the first section.
Antennas are a 3 element 15 mtr Yagi and a 56'
long 40 mtr dipole (new Force 12 Magnum 140N design). The 40 mtr
dipole is only 5' below the 15 mtr Yagi and does not disturb the
Yagi.
LPT Towers priced from $1,099-1,390 local pick-up; add for professional shipping crate.
LPT Towers come with base for concrete and brackets for attachment to roof eave.
Top plate is pre-drilled (and removeable) for the common rotator bolt patterns.
X-base, T-extenders, Hinge Base, Powder Coating, Custom heights & trailers are optional.
Ready for your rotator and a Force 12 Antenna!